This unique 24/7 intensive use chair combines the utility of a task chair with the comfort of a high back. Lean against the headrest or neck roll, or slide the headrest out of the way and lock the chair with a forward tilt for additional support while doing desk work. With its wide seat pan the 3152HR is a study, spacious and comfortable chair. The 3152HR handles up to 550lbs., has lumbar, seat-depth and back adjustments, a 2:1 recline tilt ratio and articulating headrest.
Include an adjustable
headrest that can be used as a neckroll, headrest, or you can fold it out of
FIVE POSITION TILT
Recline to one of five
desired positions and keep it there with the push of a button.
This chair comes with a
slight forward tilt. This position can be locked out to prevent the forward
2:1 RECLINE RATIO
The 2:1 Syncro tilt keeps
your knees and legs in an ergonomically correct position while allowing you to
comfortably recline. For every 2 degrees of back recline, the seat reclines 1
degree maintaining ergonomic comfort.
BACK HEIGHT ADJUSTMENT
Ratchet back adjust from
21” to 24” high for taller users.
7 LEG BASE
Seven legs means 20% ease
of movement and more stability over five leg chairs. This is especially
important for larger individuals that find moving in their chair difficult.
Steel construction with metal strength ring and tested to 10,000lb dynamic
load, our base is unmatched in strength and stability.
Two point stem, shock
absorber and special bore construction provides an extremely smooth and quiet
swivel and roll not found in standard casters. Once the chair is sat in, the
brake is released and allows the chair to roll freely. This is important for
large people that need to put weight on the arms to be able to sit. Spring
shock absorber prolongs the life of the caster as well as the chair. Closed
Construction reduces the amount of dirt and hair that can get into the caster,
prolonging the life of the caster.
ADJUSTABLE LUMBAR SUPPORT
lumbar support puts back pressure relief at your fingertips. Adjustable back
insures lumbar is exactly where you want it.
Easily adjust the width of
the armrests to accommodate a larger person or a person with a duty belt just
by sliding out the arms. No tools required to adjust.Adjustable 2.5” on both sides. Swing arm style will swing out of the way
from a seated position.
ERGO AIR SUSPENSION SYSTEM
Our Ergo Air Suspension
(EAS2) dissipates the occupant’s weight over the entire chair surface improving
blood flow and increasing oxygen levels to tissues. Improved blood flow and
increased oxygen levels improves concentration and productivity and decreases
fatigue. EAS2 conforms to the shape of each occupant, as it almost instantly
bounces back to original shape when weight is lifted. No springs eliminates the
chances of squeaky or flattened springs.
REPLACEABLE COVERS & FOAM
Covers and foam can wear,
but our frames are virtually indestructible.Bring back that "brand new" look in minutes even after years
of 24/7 service.Simply
remove the covers and foam and replace with new ones.Covers are held on back hook-and-loop and can be replaced in a matter of
ALL STEEL FRAME
Ten gauge steel maintains
the original tensile strength and rigidity over years of 24/7 heavy duty use.
The best warranty you’ll
never need. Chair is covered by a 6 year parts only warranty that includes all
normal wear and tear. Chair is covered by a 10 year warranty that includes all
manufacturing defects in materials and/or workmanship. Weight limit is 550 lbs.
in a multi-shift environment.
As an alternative option
the swing arms pads provide a large comfortable resting place for your arms.
The pads adjust fore and aft as well as in and out. The brackets themselves are
also adjustable to provide and extra 5” of width (2.5” per side). The arms will
fold out of the way at the touch of a button but are strong enough to hold
people of 550lb.
New Half-ring base option
provides foot support for shorter users.The ring sits 4.5 inches from the floor and spans 4 of the seven star
base spokes to provide support for those that need it while still allowing
users that don't need it to rotate it out of the way.
TWO-STEP STOOL BASE
New two-step base option
provides a two level footrest on a stool height chair. This option is not
recommended for heavier users.
Ships ready to assemble.Free shipping.Two or more chairs may ship via
common carrier to your dock.If
no dock is available, you may need to provide assistance moving the product
from the back of the truck to your office or contact us for a quote on special
handling options. Please call us at 1-800-409-4887 with any questions.
21" h x 22" w across upper back/17.5" in middle and 19" across lower back
21"w x 18”d (Ergo Air Suspension with foam overlay)
2:1 Syncro Tilt with five position tilt lock and tension adjustment
Back Height Adjustment:
21" - 24" high to top of chair back with Ratchet back height range 3"; (27" - 31.5" h with adjustable headrest)
Provides 3" of seat depth adjustment (to 21")
120mm Standard Cylinder -16" to 21.5"
80mm Short Cylinder - 14" to 16.5"
Air Lumbar included
Adjustable Headrest included
C-loop Arm Standard (Optional Swing-Away arms)
Seven-leg 28" diameter black, steel base (tested to 10,000 lb. dynamic load)